Are you wondering what are the video settings of Fortnite that can help you improve your game? Well, you'll find some ways here that will help you improve at Fortnite Battle Royale.
While your keyboard and mouse abilities will be the most important aspect in deciding your level of proficiency in Fortnite, if you have an outdated computer or laptop that can barely run the game, you will never reach your full potential.
To remain competitive, you must ensure that the game's framerate does not degrade to the point where it impairs your ability to play. Fortunately, if you're experiencing poor frame rates in Fortnite, there are actions you can take to boost your performance via the game's settings and your computer.
The following are some strategies to boost your FPS in Fortnite. So, let us talk about the best Fortnite video settings that can help you get an advantage over your enemies:
15. Play with the In-Game Graphics Settings
The first step in increasing your FPS in Fortnite is to experiment with the game's visual settings. As with any other game, the settings you pick will significantly influence how your game works. Reducing all of your settings to the lowest possible value will improve the game's visuals. Still, it will also significantly increase your frames-per-second and allow you to squeeze more performance out of an older setup.
Naturally, you'll want to strike a balance between visuals and frame rate. At some point, gaining a few extra frames per second doesn't compensate for the loss of visual quality. Naturally, the location of that line is subjective, so experiment with the parameters until you discover the sweet spot for your game. Once you've created it, the game will feel far more fluid.
How to Apply In-Game Graphics Settings
- Go to Settings
- Select Video Option
- Turn all your video settings to low
14. Disable Shadows
In Fortnite, shadows are extremely simple to overlook. Due to the game's aesthetic design, you're likely to forget they're there for most of your games. Unfortunately, the shadows you're avoiding are doing havoc on your system. If you have an older graphics card or don't want to bother with lowering all of your settings for a speed increase, your best option may be to disable shadows while playing.
Turning off the game's shadows has a negligible visual effect on your game. While you will see the impacts if you look attentively, they are not something you will notice while in motion or during combat. You may be able to squeeze a little more performance out of the game's other settings while maintaining a higher frame rate if you're prepared to forego shadows totally in favor of overall performance.
How to Disable Shadows:
- Open Settings
- Open Brightness Option
- Increase the brightness option
13. Try Lowering the In-Game Resolution
Resolution is another element that will affect your game. While you're likely to play the game at its maximum resolution first, lowering the resolution somewhat can alleviate some of the burdens on your GPU and allow for improved overall rendering.
Yes, this means that you will likely get less out of your pricey new 4k monitor than you had planned, but you will get more frames per second and be more competitive in the game. Even on modern PCs, it appears as though the sweet spot for Fortnite is in the 1080p range. You may change to this conventional HD option in your settings menu, which will result in a noticeable performance boost.
Again, here is an area where you'll have to choose between performance and aesthetics since you risk forfeiting the greater visual quality you paid for. However, if you're having trouble maintaining at least 30 frames per second while playing Fortnite, one of the simplest methods to increase that number is to decrease the game's resolution—even if it means dipping below 1080P.
How to Lower In-Game Resolution
- Go to Settings
- Open the Video Option
- Drag the 3D Resolution bar to left
12. Turn your View Distance to Epic
Consider yourself fortunate if you like to reduce Fortnite's view distance; the setting merely impacts the rendering quality and distance of things materializing in your vision, as illustrated in the top left of the above GIF. (Regardless of your setting, player characters will always appear from a fixed distance.)
Even still, pushing this up as far as your hardware allows lowers irritating object pop-ins, which is particularly useful while sniping or viewing the horizon from a high vantage point. We recommend the Epic setting—you'll lose just a few frames in exchange for a far more comfortable field of vision, a strategically reasonable trade-off for visual clarity.
How to Turn your View Distance to Epic
- Open Menu
- Select Settings
- Scroll down in the Video option
- Find the "view distance" in the Graphic Quality bar
- Turn it to Epic
11. Turn the Anti-Aliasing to Medium
The game's excessively stylized aesthetic partially camouflages Fortnite's sharp angles, thus reducing the frequency of the dreaded jaggy is more of a cosmetic choice than a demonstrable one. Streamers and professionals alike deactivate anti-aliasing to emphasize distant forms compared to the terrain.
However, the FPS gained are little at best since most contemporary graphics cards include much VRAM to smooth out edges without a hitch. Our recommendation: Medium, a pleasant, eh, middle ground between silky pixels borders and realistic graphics that avoids being too blurry.
How to Turn the Anti-Aliasing to Medium
- Open Menu
- Select Settings
- Scroll down in the Video option
- Find the "Anti-Aliasing" in the Graphic Quality bar
- Turn it to Medium
10. Turn the Post Processing to Low
Want the finest illustration of what post-processing accomplishes? Take a step into the hurricane. (Except that you should not since you will perish.) Although diffused lighting and glowy effects are usually handled in post-production, this setting also establishes brightness and contrast settings based on the behavior of light bouncing off most objects.
For scoped combat, you'll want to keep this on low, as your sight will brighten significantly with minimal post-processing altering the luminance of what you're looking at. Medium to Epic levels can significantly dim your scope's vision, making it more difficult to detect a slight moving blur if the environment is too foggy.
How to Turn the Post Processing to Low
- Open Menu
- Select Settings
- Scroll down in the Video option
- Find the "Post Processing" in the Graphic Quality bar
- Turn it to Low
9. Protanope Color Blind Mode
As brilliant and beautiful as Fortnite's varied landscapes might be, those colors can also act as a distraction when attempting to locate foes. By increasing the Protanope saturation in Fortnite's settings, you may see adversaries much faster (and perhaps farther away) than usual. This option is not required to be color blind, and some of the best Fortnite players utilize it to bolster their vision while playing.
How to Apply Color Blind Mode
- Open Menu
- Select Settings
- Scroll down in the Video option
- Find the "Color Blind Mode" in the Graphic Quality bar
- Apply Protanope
8. Turn off Motion Blur
While this setting provides an aesthetically pleasing visual experience in Fortnite, the visual effects generated by motion blur might cause latency in your game, resulting in slower reaction times during intense battles.
To achieve the fastest response speeds possible during a shootout, you'll want to disable motion blur in your settings, sacrificing smooth visual effects for a higher chance of winning in Fortnite.
How to Turn Off Motion Blur
- Open Menu
- Go to settings
- In the Video Option, Find the "Advanced Graphics."
- Turn off Motion Blur
7. Turn on "Visualize Sound Effect."
If you ever find yourself unable to utilize your headphones or need to down the noise, you risk missing treasures or even opponents.
By activating the visual sound effects setting, you'll be able to see a ring that shows which players or chests are making noises and in which direction they're coming from.
How to Turn on "Visualize Sound Effect"
- Open Menu
- Go to Settings
- Open the Audio Option
- Find "Sound."
- Turn on Visualize Sound Effect
6. High Textures
It is advised that textures be set to a high value whenever feasible. Textures of poor quality can impair sight and make everything appear hazy. Unless your PC is incapable of handling medium textures, it is advised that you set them to at least medium quality.
How to use High Textures:
- Open Menu
- Go to Settings
- Go to Video
- Turn Textures to High
5. Turn off Vsync
Vertical synchronization introduces a delay between the time the image appears on the monitor and what is happening in real-time. It might result in the game feeling significantly less responsive. Unless you are experiencing severe screen tearing, turn off Vsync.
How to Turn off Vsync
- Open Menu
- Go to Settings
- Go to Advanced Graphics Option
- Turn Off Vsync
4. Turn View Distance to Near
Although higher is preferable for detecting attackers, it can be tiring. Therefore, experiment to determine the optimal balance of seeing far and maintaining a high frame rate for your PC. With visual characteristics reduced, you should maintain a reasonable view distance and performance with the proper Fortnite Season 4 settings.
How to Turn View Distance to Near
- Open Menu
- Go to Settings
- In the Graphics Quality bar
- Toggle View Distance to Near
3. Do not Use Window Mode
While many are beneficial when utilized properly, there are several that the majority of players should avoid. Some argue that Fortnite's windowed mode falls under the latter category, while others argue that it does not. The first thing to understand is that playing in windowed mode significantly impacts the total frame rate, which means that the game will perform significantly poorer in this mode than in full-screen mode.
Additionally, playing in windowed mode results in far higher input latency than playing in full-screen mode, which is something to keep in mind. These are two compelling reasons to avoid windowed mode since it will undoubtedly negatively affect how you play Fortnite. Windowed mode is also known to create resolution difficulties, which is another significant concern. Therefore, always choose the full-screen mode as it will benefit you much.
How Not to Use Window Mode
- Open Menu
- Go to Settings
- Find Mode
- Turn to Full-screen Mode if it’s on Window Mode
2. Turn off Spectator Count
If you find your HUD a little congested when playing Fortnite, there is a solution to eliminate clutter and optimize the viewable area.
Not only will disabling this setting enhance your looks, but it will also speed up your gameplay, making your game run somewhat faster.
How to Turn off Spectator Count
- Open Menu
- Go to Settings
- Go to Game UI
- Turn off Spectator Count
1. Mark Danger While Targeting an Enemy
You risk losing games in Fortnite if you do not communicate effectively with your teammates. To enable effective communication, you should provide the capability of identifying danger while targeting or aiming your weapon. This option enables you to alert your colleagues fast and simply about potential danger.
How to Mark Danger While Targeting an Enemy
- Open Menu
- Go to Settings
- Select Combat Option
- Turn On Mark Danger While Targeting
